I've used this on both Blu-Ray rips and DVD Rips. Best video quality I've seen yet.
If you want to be able to watch videos you currently own on your Nook Color, Handbrake provides some excellent solutions for you. Follow this guide to convert videos for Nook Color. You will first need to grab Handbrake and install it. If you would like to be able to preview the videos, before converting, then you will need to download the VLC software, a video player that is also open source. Next, follow these steps: * Run the Handbrake program. * In the presets area, choose High Profile. * On the Source button in the toolbar, load the video you want to convert from its stored location. * Click the Browse button to select the destination for the file you will be encoding. * Head to the Picture tab. You will then need to set the Anamorphic menu to reflect None. It's highly important, so be sure you have the setting correct. * In the Width box option, enter the number 720. Also check the Keep Aspect Ratio button. You should not need to set the Height filter, as it should automatically adjust to the correct setting for your Width selection. Halfway there! * Now head to the Video Filters tab. You will now need to set Decomb and Detelecine options to Off. * If you are going to be using a standard resolution video or DVD video, leave the Framerate option to reflect the same as the Source option. However, if your source is HD video, which is at minimum 60 frames per second (60fps), you will need to alter the Framerate to show 29.97. * Click the Audio tab. Check the number of tracks that appear. The ultimate goal is to have one track with the audio codec that will display as AAC if it is FAAC, and MP3 if using Lame. * Set Mixdown to Stereo. * Select the Samplerate as 48. * Set the Bitrate to 128. Almost Done! * Head to the Advanced tab and set the Maximum B-frames to 0. * Next, uncheck the CABAC Entropy Coding option, the Weighted P-Frames option, and the 8x8 Transform option. * Hit Start. Handbrake will now give you the estimation of time it will take to complete the encoding process. Once it is completed, you can copy your converted video to the NC by sending it to either the internal memory or by using an SD Card. If you want to be extra safe, check out the Preview option to be sure everything is okay before proceeding with the conversion, as the process may take up your computer's resources for an hour or more.